EMA Compact
Monitoring Station
EMA Compact
Monitoring Station
New generation ultra-compact
all-in-one monitoring station
New generation ultra-compact all-in-one monitoring station
EMA Compact is a new generation ultra-compact and resistant monitoring station equipped with an independent backup power supply source. Thanks to its functionalities and low-weight and high-IP-rated construction, it seems to be ideally suited for interior and exterior applications in early warning or industrial automation systems.
According to a type of sensors connected, the station can monitor weather conditions, water levels in streams, rivers, tanks, and mud or sludge pits, the stability of building structures, and the presence of hazardous substances in the environment. It can assess a variety of risks on a multi-level basis. The EMA Compact monitoring station sends the values it measures and calculates through one or two independent channels to warning control centres or mobile phones, or it can directly activate electronic sirens, PA systems, or beacons.
Built-in backup batteries ensure its seamless and reliable operation even in case of an external power failure, and even solar panels suffice as a long-term energy source. A stainless-steel box allows its outdoor installation without the necessity of any additional weather protection.
EMA Compact is a new generation ultra-compact and resistant monitoring station equipped with an independent backup power supply source. Thanks to its functionalities and low-weight and high-IP-rated construction, it seems to be ideally suited for interior and exterior applications in early warning or industrial automation systems.
According to a type of sensors connected, the station can monitor weather conditions, water levels in streams, rivers, tanks, and mud or sludge pits, the stability of building structures, and the presence of hazardous substances in the environment. It can assess a variety of risks on a multi-level basis. The EMA Compact monitoring station sends the values it measures and calculates through one or two independent channels to warning control centres or mobile phones, or it can directly activate electronic sirens, PA systems, or beacons.
Built-in backup batteries ensure its seamless and reliable operation even in case of an external power failure, and even solar panels suffice as a long-term energy source. A stainless-steel box allows its outdoor installation without the necessity of any additional weather protection.
Sophisticated compact monitoring stations for warning systems
Key features
Compactness
An all-in-one device – a small, compact stainless-steel box, an embedded power supply source, and a backup battery with a charger for easy and quick installation.
Flexibility
Despite its small dimensions, it has an unusually high number of interfaces for different sensors, supports a vast amount of protocols, and it can be used in simple but also sophisticated monitoring systems.
Solar power supply and mobility
The device can be powered not only from the standard 120-230V mains but also from solar cells, making it a completely autonomous station that can be placed virtually anywhere and also designed as a portable unit.
Intelligence
Built-in applications allow multi-level risk assessment, communication either directly with electronic sirens, warning control centres, or mobile devices. Working parameters can be changed remotely using a sophisticated management system.
Communications
The station communicates with standard wireless and wired communication channels – through GSM and mobile operator networks, WiFi, Ethernet, RS232, RS485, and analogue radio.
Technical Parameters
| Power supply | main: 90 V – 264 V AC / 50 Hz, 60 Hz solar: 12 V, panel min. 50W* |
| Power consumption | max. 25 W during the battery charging process max. 2 W in standby mode with fully-charged batteries (without sensors) |
| IP rating of the station box | IP66 |
| Numbers of inputs/outputs | 24 configurable binary input or output • Inputs: passive – switch to ground • Outputs: open drain, max.100mA/50V 8 analogue input with galvanic isolation • voltage sense mode: 0 – 30V • current sense mode: 4 – 20mA |
| Cable communication channels | RS232, RS485 Ethernet* |
| Wireless communication channels | WiFi*, GSM mobile data*, GSM SMS*, analog radio* |
| Protocols | TLG2 MODBUS* |
| Dimensions of the station box | 300×210×110 mm |
| Weight of the station box (without batteries) | 6 kg |
| Operating temperature range | -25°C to +65°C |
| * optional item |
|---|
| Power supply | main: 90 V – 264 V AC / 50 Hz, 60 Hz solar: 12 V, panel min. 50W* |
| Power consumption | max. 25 W during the battery charging process max. 2 W in standby mode with fully-charged batteries (without sensors) |
| IP rating of the station box | IP66 |
| Numbers of inputs/outputs | 24 configurable binary input or output • Inputs: passive – switch to ground • Outputs: open drain, max.100mA/50V 8 analogue input with galvanic isolation • voltage sense mode: 0 – 30V • current sense mode: 4 – 20mA |
| Cable communication channels | RS232, RS485 Ethernet* |
| Wireless communication channels | WiFi*, GSM mobile data*, GSM SMS*, analog radio* |
| Protocols | TLG2 MODBUS* |
| Dimensions of the station box | 300×210×110 mm |
| Weight of the station box (without batteries) | 6 kg |
| Operating temperature range | -25°C to +65°C |
| * optional item |
|---|
EMA Professional
Monitoring Station
EMA Professional
Monitoring Station
High-performance monitoring station of a new generation
High-performance monitoring station of a new generation
EMA Professional is a new generation of high-performance monitoring stations, designed primarily for sophisticated early warning systems or systems requiring multi-channel communications using large-sized communication devices that need to be placed in a single box. The monitoring station is also suitable for industrial automation applications.
According to a type of sensors connected the station can monitor weather conditions, water levels, the stability of building structures, and the presence of hazardous substances in the environment. It can also control valves, motors and actuators. It assesses risks on a multi-level basis. The EMA Professional monitoring station sends the values it measures and calculates through various communication channels to warning control centres or mobile phones, or it can directly activate electronic sirens, PA systems, or beacons. It is a modular device providing a virtually unlimited number of inputs/outputs.
An innovated power supply source/charger allows multi-level charging of backup batteries with overcharge protection, thereby extending their life. At the same time, it performs battery load testing at set intervals and notifies users of the monitoring station of the battery replacement. The station is housed in a stainless steel box and can be installed either outdoors or in industrial environments without the necessity of any additional protection.
High-quality professional monitoring stations for warning systems
Key features
Compactness
A modular yet incredibly compact monitoring device – all in one robust stainless steel box.
Flexibility
The station has a virtually unlimited number of interfaces for different sensors and simple configuration, and it finds its application even in the most sophisticated monitoring and automation systems.
Solar power supply and mobility
The device can be powered not only from the standard 120-230V mains but also from solar cells, making it a completely autonomous station that can be placed virtually anywhere and also designed as a portable unit.
Intelligence
Built-in applications allow multi-level risk assessment, communication either directly with electronic sirens, warning control centres, or mobile devices. Working parameters can be changed remotely using a sophisticated management system. An innovated power supply source/charger allows multi-level charging of backup batteries with overcharge protection, thereby extending their life.
Communications
The station communicates with all standard wireless and wired communication channels – through GSM and mobile operator networks, WiFi, Ethernet, RS232, RS485, and analogue radio. Due to its dimensions, the box can house even large-sized communication devices.
Sounding
The station can work as a connecting, intermediate link to ensure live-voice transmission from control centres to warning sirens, PA systems, and loudspeakers at the place of their installation. Besides, it can be equipped with an electronic amplifier and an acoustic control unit so that it can perform the function of a siren or PA system itself.
Technical Parameters
| Power supply | main: 90 V – 264 V AC / 50 Hz, 60 Hz solar: 12 V, panel min. 50W* |
| Power consumption | max. 200 W during the battery charging process max. 5 W in standby mode with fully-charged batteries (without sensors) |
| IP rating of the station box | IP54/IP66* |
| Numbers of inputs/outputs | Uniquely defined binary inputs and outputs 8 binary inputs / 2 binary outputs • Inputs: passive, switch-to-ground • Outputs: open drain, max. 100 mA/50 V Configurable/User-defined binary inputs/outputs 24 to 384 of configurable binary inputs and outputs • Inputs: passive, switch-to-ground • Outputs: open drain, max. 100 mA/50 V Configurable analogue inputs 8 to 128 of configurable analogue inputs with galvanic isolation • voltage sense mode: 0 – 30 V • current sense mode: 4 – 20 mA |
| Cable communication channels | RS232, RS485, Ethernet* |
| Wireless communication channels | WiFi*, GSM mobile data*, GSM SMS*, analog radio*, digital radio* |
| Protocols | TLG2 MODBUS* |
| Dimensions of the station box | 400×600×350 mm 650×600×350 mm* |
| Weight of the station box (without batteries) | 21 kg 25 kg* |
| Operating temperature range | -25°C to +65°C |
| * optional item |
|---|
| Power supply | main: 90 V – 264 V AC / 50 Hz, 60 Hz solar: 12 V, panel min. 50W* |
| Power consumption | max. 200 W during the battery charging process max. 5 W in standby mode with fully-charged batteries (without sensors) |
| IP rating of the station box | IP54/IP66* |
| Numbers of inputs/outputs | Uniquely defined binary inputs and outputs 8 binary inputs / 2 binary outputs • Inputs: passive, switch-to-ground • Outputs: open drain, max. 100 mA/50 V Configurable/User-defined binary inputs/outputs 24 to 384 of configurable binary inputs and outputs • Inputs: passive, switch-to-ground • Outputs: open drain, max. 100 mA/50 V Configurable analogue inputs 8 to 128 of configurable analogue inputs with galvanic isolation • voltage sense mode: 0 – 30 V • current sense mode: 4 – 20 mA |
| Cable communication channels | RS232, RS485, Ethernet* |
| Wireless communication channels | WiFi*, GSM mobile data*, GSM SMS*, analog radio*, digital radio* |
| Protocols | TLG2 MODBUS* |
| Dimensions of the station box | 400×600×350 mm 650×600×350 mm* |
| Weight of the station box (without batteries) | 21 kg 25 kg* |
| Operating temperature range | -25°C to +65°C |
| * optional item |
|---|
EMA Industrial
Monitoring Station
EMA Industrial
Monitoring Station
New generation industrial monitoring and control station
EMA Industrial is the most powerful new generation modular monitoring and automation station produced by the Telegrafia company. It is designed for large and sophisticated systems with a high level of automation. Not only does it allow the continuous collection and evaluation of data from hundreds of sensors, but it also communicates and controls other SCADA systems according to pre-programmed scenarios. For the most extensive industrial sites, it is possible to connect several EMA Industrial stations into a single functional unit while using the existing technological infrastructure and standardised rack cabinets.
According to a type of sensors connected, the station can monitor the presence of hazardous substances in industrial and storage areas, the stability of building structures, as well as weather conditions and water levels in streams, rivers, tanks, and mud or sludge pits. It can assess a variety of risks on a multi-level basis. Besides monitoring, it can also control and put into operation lighting systems, beacons, valves, motors and actuators.
The EMA Industrial monitoring station sends the values it measures and calculates through various communications channels to warning control centres or mobile phones, or it can directly activate electronic sirens, PA systems, or other devices. It is a modular device providing a virtually unlimited number of inputs/outputs.
If necessary, it is possible to deploy several EMA Industrial monitoring stations all over the industrial area and use the existing communications infrastructure or complement it with other suitable communications modules. An innovated power supply source/charger allows multi-level charging of backup batteries with overcharge protection, thereby extending their life. At the same time, it performs battery load testing at set intervals and notifies users of the monitoring station of the necessity of battery replacement. The station is housed in a rack cabinet.
High-quality professional monitoring stations for warning systems
Key features
Modularity and flexibility
The modularity of the EMA Industrial monitoring station greatly facilitates the optimised deployment of stations within the industrial area according to routine safety monitoring requirements. The station contains a virtually unlimited number of interfaces for various sensors; it is easily configurable and applicable in even the most sophisticated monitoring and automation systems.
Solar power supply and mobility
The device can be powered from the standard 120-230V mains, but also solar cells, thus making it a completely autonomous, portable station that can be situated virtually anywhere.
Intelligence
Built-in applications provide for multi-level risk assessment, communications either directly with electronic sirens, evacuation PA systems, warning control centres or mobile devices. Due to a sophisticated control system, all working parameters can be changed remotely. An innovated power supply source/charger allows multi-level charging of backup batteries with overcharge protection, thereby extending their life.
Communications
The station communicates with all standard wireless and wired communication channels – through GSM and mobile operator networks, WiFi, Ethernet, RS232, RS485, and analogue radio. It can be connected to the existing cable networks, including the common computer infrastructure.
Sounding
The station can work as a connecting, intermediate link to ensure live-voice transmission from control centres to warning sirens, PA systems, and loudspeakers at the place of their installation. Besides, it can be equipped with an electronic amplifier and an acoustic control unit so that it can perform the function of a siren or PA system itself.
Technical Parameters
| Power supply | mains: 90 V – 264 V AC / 50 Hz or 60 Hz solar: 12 V, panel min. 50W* |
| Power consumption | max. 200 W max. 5 W in standby mode |
| Numbers of inputs/outputs | Uniquely defined binary inputs and outputs 8 binary inputs / 2 binary outputs • Inputs: passive, switch-to-ground • Outputs: open drain, max. 100 mA/50 V Configurable/User-defined binary inputs/outputs 24 up to a virtually unlimited number** of configurable binary inputs and outputs • Inputs: passive, switch-to-ground • Outputs: open drain, max. 100 mA/50 V Configurable analogue inputs 8 up to a virtually unlimited number** of configurable analogue inputs with galvanic isolation • voltage sense mode: 0 – 30 V • current sense mode: 4 – 20 mA |
| Cable communication channels | RS232, RS485, Ethernet* |
| Wireless communication channels | WiFi*/ GSM mobile data*/ GSM SMS* analogue radio*/ digital radio* |
| Protocols | TLG2, MODBUS* |
| Dimensions of the station box | height 4U to be housed in a 19“ rack cabinet depth 100 mm / 200 mm |
| Operating temperature range | -25°C to +65°C |
| * optional item ** The actual number depends on exact project specifications |
|---|
| Power supply | mains: 90 V – 264 V AC / 50 Hz or 60 Hz solar: 12 V, panel min. 50W* |
| Power consumption | max. 200 W max. 5 W in standby mode |
| Numbers of inputs/outputs | Uniquely defined binary inputs and outputs 8 binary inputs / 2 binary outputs • Inputs: passive, switch-to-ground • Outputs: open drain, max. 100 mA/50 V Configurable/User-defined binary inputs/outputs 24 up to a virtually unlimited number** of configurable binary inputs and outputs • Inputs: passive, switch-to-ground • Outputs: open drain, max. 100 mA/50 V Configurable analogue inputs 8 up to a virtually unlimited number** of configurable analogue inputs with galvanic isolation • voltage sense mode: 0 – 30 V • current sense mode: 4 – 20 mA |
| Cable communication channels | RS232, RS485, Ethernet* |
| Wireless communication channels | WiFi*/ GSM mobile data*/ GSM SMS* analogue radio*/ digital radio* |
| Protocols | TLG2, MODBUS* |
| Dimensions of the station box | height 4U to be housed in a 19“ rack cabinet depth 100 mm / 200 mm |
| Operating temperature range | -25°C to +65°C |
| * optional item ** The actual number depends on exact project specifications |
|---|
Sensors
Sensors
Level measurement – Submersible sensors
Stainless-steel submersible sensors for continuous easurement of water levels
| Output | analogue |
| Measurement accuracy deviation | 0,5% FSO |
| IP rating | IP 68 |
Stainless-steel submersible sensors for continuous measurement of water levels and levels of clean or slightly contaminated liquids
| Output | analogue |
| Measurement accuracy deviation | 0,5% FSO |
| IP rating | IP 68 |
Stainless-steel submersible probes for continuous measurement of water levels and levels of clean or slightly contaminated liquids
| Output | analogue |
| Measurement accuracy deviation | 0,1% FSO |
| IP rating | IP 68 |
Stainless-steel submersible probes for continuous measurement of water levels and levels of clean or slightly contaminated liquids
| Output | Modbus/RTU |
| Measurement accuracy deviation | 0,1% FSO |
| IP rating | IP 68 |
Contact
Find Us
Contacts Košice – the company’s headquarters
- Lomena 7, 040 01 Kosice
- sales@telegrafia.sk
- Company ID: 17081386 VAT ID: SK2020484609